Sleeves for Joining High Tensile Wire

Use to Splice or Tie Off High Tensile Wire

Aluminum crimp sleeves for joining high tensile wire. Use 3 sleeves to splice wire; 2 sleeves to tie off at end posts or to secure ratchet strainer. Made in USA.

C12 Sleeves

• Use C12 sleeves for 14 or 16 gauge smooth wire
• Use the 1-2 slot on your crimp tool
• Use 2 to 3 sleeves per splice
• Leave 1/4 in. gap between adjacent sleeves
• Keep dry until use
• 100 pieces

C23 Sleeves

• Use C23 sleeves for 12.5 to 16 gauge smooth wire
• Use the 2-3 slot on your crimp tool
• Use 2 to 3 sleeves per splice
• Leave 1/4 in. gap between adjacent sleeves
• Keep dry until use
• 100 pieces

Note on Installing Sleeves: Crimp sleeves should be placed vertically between the jaws of your crimping tool. Do not place them horizontally and swage them into a "figure 8" shape.