Sure Grip Earth Anchors

Painted Earth Anchors w/ Solid Welded Eye & Welded Helix

These painted earth anchors are made of high quality steel with a center eye and helix plate.

Installation: Earth anchors are turned in at an angle, inline with the attached wire and perpendicular to the end post. If soil conditions are such that it is too difficult to turn the anchor into the ground, a hole is dug to a depth of approximately 1/2 the length of the anchor. The anchor is then turned into the ground by hand, using a rod, crow bar, or length of pipe threaded through the welded eye. Once the anchor is installed to full depth, soil is tamped into the hole six inches at a time.

Choosing the right sized anchor for your trellising application:

• 30″ x ½″ diameter x 4&Prmie; helix - for trellis systems less than 150′
• 40″ x 5⁄8″ diameter x 6″ helix - for trellis systems less than 300′
• 48″ x ¾″ diameter x 6″ helix - for trellis systems of 300 to 600′